How to Fix or Replace a Leaky Toilet
A leaking toilet can be a nuisance, but unlike many plumbing problems, toilets are both accessible and easily maintained by even the most novice DIY-er. Follow the three simple steps below to get to the bottom of your flushing woes.
1. Locating the Source of the Leak
An old toilet can cause problems, but that doesn't mean that it needs to be replaced. Most toilet leaks stem from either a faulty flange or loose connections. If you can hear water continuously running, the flange is likely the culprit and can be easily replaced. If the leak is relatively quiet, then you may have a loose water line connection or the toilet’s floor bolts need to be snugged up.
2. Removing the Toilet and Replacing the Gasket
If neither the flange nor the connections are the issue, you may have a gasket problem causing your leaking toilet. To replace the gasket, you can remove the toilet. Turn off the water supply and flush the water. Once dry, you can loosen the floor bolts and remove the toilet, exposing the gasket. Set the new gasket in place and reconnect the toilet to test the seal.
3. Replacing the Toilet
If replacing the wax gasket did not resolve the issue, then it may be time to replace the toilet. You can replace it by following the same process for removing the toilet, but this time you will install the new toilet in its place. Snug up all the bolts and connections and test the new toilet.
4. Calling in the Cavalry
If you are still experiencing leaks, then you may require either plumbing or toilet repair. As this job has many variables, it may be beneficial to hire a licensed professional in South Oceanside, CA to assess and inspect the system.